This implements an efficient and zero-allocation script tokenizer that
is exported to both provide a new capability to tokenize scripts to
external consumers of the API as well as to serve as a base for
refactoring the existing highly inefficient internal code.
It is important to note that this tokenizer is intended to be used in
consensus critical code in the future, so it must exactly follow the
existing semantics.
The current script parsing mechanism used throughout the txscript module
is to fully tokenize the scripts into an array of internal parsed
opcodes which are then examined and passed around in order to implement
virtually everything related to scripts.
While that approach does simplify the analysis of certain scripts and
thus provide some nice properties in that regard, it is both extremely
inefficient in many cases, and makes it impossible for external
consumers of the API to implement any form of custom script analysis
without manually implementing a bunch of error prone tokenizing code or,
alternatively, the script engine exposing internal structures.
For example, as shown by profiling the total memory allocations of an
initial sync, the existing script parsing code allocates a total of
around 295.12GB, which equates to around 50% of all allocations
performed. The zero-alloc tokenizer this introduces will allow that to
be reduced to virtually zero.
The following is a before and after comparison of tokenizing a large
script with a high opcode count using the existing code versus the
tokenizer this introduces for both speed and memory allocations:
benchmark old ns/op new ns/op delta
------------------------------------------------------------
BenchmarkScriptParsing 153099 961 -99.37%
benchmark old allocs new allocs delta
------------------------------------------------------------
BenchmarkScriptParsing 1 0 -100.00%
benchmark old bytes new bytes delta
------------------------------------------------------------
BenchmarkScriptParsing 466945 0 -100.00%
The following is an overview of the changes:
- Introduce new error code ErrUnsupportedScriptVersion
- Implement zero-allocation script tokenizer
- Add a full suite of tests to ensure the tokenizer works as intended
and follows the required consensus semantics
- Add an example of using the new tokenizer to count the number of
opcodes in a script
- Update README.md to include the new example
- Update script parsing benchmark to use the new tokenizer
This removes the ScriptVerifyDERSignatures flag from the txscript
package, changes the default semantics to always enforce its behavior
and updates all callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so
there is no need to require a flag to conditionally toggle it.
It should be noted that the tests removed from script_tests.json
specifically dealt with ensuring non-DER-compliant signatures were
handled properly when the ScriptVerifyDERSignatures flag was not set.
Therefore, they are no longer necessary.
Finally, the DERSIG indicator to enable the flag in the test data has
been retained for now in order to keep the logic changes separate.
This removes the ScriptBip16 flag from the txscript package, changes the
default semantics to always enforce its behavior, and updates all
callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so there is
no need to require a flag to conditionally toggle it.
Also, since it is no longer possible to invoke the script engine without
the flag with the clean stack flag, it removes the now unused
ErrInvalidFlags error and associated tests.
It should be noted that the test removed from script_tests.json
specifically dealt with ensuring a signature script that contained
non-data-pushing opcodes was successful when neither the ScriptBip16 or
ScriptVerifySigPushOnly flags were set. Therefore, it is no longer
necessary.
Finally, the P2SH indicator to enable the flag in the test data has been
retained for now in order to keep the logic changes separate.
Putting the test code in the same package makes it easier for forks
since they don't have to change the import paths as much and it also
gets rid of the need for internal_test.go to bridge.
Also, do some light cleanup on a few tests while here.
This merge commit adds the following code from the
github.com/decred/dcrutil package into a new
github.com/decred/dcrd/dcrutil package:
* Address handling
* Amount type
* AppDataDir func
* bitflags functions
* Block wrapper type
* Hash160 func
* Tx wrapper type
* WIF type
as well as all tests for this code.
The old github.com/decred/dcrutil/hdkeychain package has also been
merged and moved to github.com/decred/dcrd/dcrutil/hdkeychain.
dcrd packages have been updated to use the new packages and the dep
files have been updated for this change.
Contains the following commits:
- 711f33450c
- b6b1e55d1e
- Reverted because Travis is already at a more recent version
- bd4e64d1d4
Also, the merge commit contains the necessary decred-specific
alterations, converts all other references to sha to hash to keep with
the spirit of the merged commits, and various other cleanup intended to
bring the code bases more in line with one another.
This commit is the first stage of several that are planned to convert
the blockchain package into a concurrent safe package that will
ultimately allow support for multi-peer download and concurrent chain
processing. The goal is to update btcd proper after each step so it can
take advantage of the enhancements as they are developed.
In addition to the aforementioned benefit, this staged approach has been
chosen since it is absolutely critical to maintain consensus.
Separating the changes into several stages makes it easier for reviewers
to logically follow what is happening and therefore helps prevent
consensus bugs. Naturally there are significant automated tests to help
prevent consensus issues as well.
The main focus of this stage is to convert the blockchain package to use
the new database interface and implement the chain-related functionality
which it no longer handles. It also aims to improve efficiency in
various areas by making use of the new database and chain capabilities.
The following is an overview of the chain changes:
- Update to use the new database interface
- Add chain-related functionality that the old database used to handle
- Main chain structure and state
- Transaction spend tracking
- Implement a new pruned unspent transaction output (utxo) set
- Provides efficient direct access to the unspent transaction outputs
- Uses a domain specific compression algorithm that understands the
standard transaction scripts in order to significantly compress them
- Removes reliance on the transaction index and paves the way toward
eventually enabling block pruning
- Modify the New function to accept a Config struct instead of
inidividual parameters
- Replace the old TxStore type with a new UtxoViewpoint type that makes
use of the new pruned utxo set
- Convert code to treat the new UtxoViewpoint as a rolling view that is
used between connects and disconnects to improve efficiency
- Make best chain state always set when the chain instance is created
- Remove now unnecessary logic for dealing with unset best state
- Make all exported functions concurrent safe
- Currently using a single chain state lock as it provides a straight
forward and easy to review path forward however this can be improved
with more fine grained locking
- Optimize various cases where full blocks were being loaded when only
the header is needed to help reduce the I/O load
- Add the ability for callers to get a snapshot of the current best
chain stats in a concurrent safe fashion
- Does not block callers while new blocks are being processed
- Make error messages that reference transaction outputs consistently
use <transaction hash>:<output index>
- Introduce a new AssertError type an convert internal consistency
checks to use it
- Update tests and examples to reflect the changes
- Add a full suite of tests to ensure correct functionality of the new
code
The following is an overview of the btcd changes:
- Update to use the new database and chain interfaces
- Temporarily remove all code related to the transaction index
- Temporarily remove all code related to the address index
- Convert all code that uses transaction stores to use the new utxo
view
- Rework several calls that required the block manager for safe
concurrency to use the chain package directly now that it is
concurrent safe
- Change all calls to obtain the best hash to use the new best state
snapshot capability from the chain package
- Remove workaround for limits on fetching height ranges since the new
database interface no longer imposes them
- Correct the gettxout RPC handler to return the best chain hash as
opposed the hash the txout was found in
- Optimize various RPC handlers:
- Change several of the RPC handlers to use the new chain snapshot
capability to avoid needlessly loading data
- Update several handlers to use new functionality to avoid accessing
the block manager so they are able to return the data without
blocking when the server is busy processing blocks
- Update non-verbose getblock to avoid deserialization and
serialization overhead
- Update getblockheader to request the block height directly from
chain and only load the header
- Update getdifficulty to use the new cached data from chain
- Update getmininginfo to use the new cached data from chain
- Update non-verbose getrawtransaction to avoid deserialization and
serialization overhead
- Update gettxout to use the new utxo store versus loading
full transactions using the transaction index
The following is an overview of the utility changes:
- Update addblock to use the new database and chain interfaces
- Update findcheckpoint to use the new database and chain interfaces
- Remove the dropafter utility which is no longer supported
NOTE: The transaction index and address index will be reimplemented in
another commit.
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
Introduce an ECDSA signature verification into btcd in order to
mitigate a certain DoS attack and as a performance optimization.
The benefits of SigCache are two fold. Firstly, usage of SigCache
mitigates a DoS attack wherein an attacker causes a victim's client to
hang due to worst-case behavior triggered while processing attacker
crafted invalid transactions. A detailed description of the mitigated
DoS attack can be found here: https://bitslog.wordpress.com/2013/01/23/fixed-bitcoin-vulnerability-explanation-why-the-signature-cache-is-a-dos-protection/
Secondly, usage of the SigCache introduces a signature verification
optimization which speeds up the validation of transactions within a
block, if they've already been seen and verified within the mempool.
The server itself manages the sigCache instance. The blockManager and
txMempool respectively now receive pointers to the created sigCache
instance. All read (sig triplet existence) operations on the sigCache
will not block unless a separate goroutine is adding an entry (writing)
to the sigCache. GetBlockTemplate generation now also utilizes the
sigCache in order to avoid unnecessarily double checking signatures
when generating a template after previously accepting a txn to the
mempool. Consequently, the CPU miner now also employs the same
optimization.
The maximum number of entries for the sigCache has been introduced as a
config parameter in order to allow users to configure the amount of
memory consumed by this new additional caching.
This commit renames the Script type to Engine to better reflect its
purpose. It also renames the NewScript function to NewEngine to match.
This is being done because name Script for the engine is confusing since
it implies it is an actual script rather than the execution environment
for the script. It also paves the way for eventually supplying a
ParsedScript type which will be less likely to be confused with the
execution environment.
While moving the code, some additional variable names and comments have
been updated to better match the style used throughout the rest of the
code base. In addition, an attempt has been made to use consistent naming
of the engine as 'vm' instead of using different variables names as it was
previously.
Finally, the relevant engine code has been moved into a new file named
engine.go and related tests moved to engine_test.go.
This commit removes the unnecessary sigScript parameter from the
txscript.NewScript function. This has bothered me for a while because it
can and really should be obtained from the provided transaction and input
index. The way it was, the passed script could technically be different
than what is in the transaction. Obviously that would be an improper use
of the API, but it's safer and more convenient to simply pull it from the
provided transaction and index.
Also, since the function signature is changing anyways, make the input
index parameter come after the transaction which it references.
This commit removes the error returns from the BlockHeader.BlockSha,
MsgBlock.BlockSha, and MsgTx.TxSha functions since they can never fail and
end up causing a lot of unneeded error checking throughout the code base.
It also updates all call sites for the change.
Remove ScriptCanonicalSignatures and use the new
ScriptVerifyDERSignatures flag. The ScriptVerifyDERSignatures
flag accomplishes the same functionality.
This commit adds a new example to the txscript package that demonstrates
creating a new transaction which redeems funds and signing the referenced
transaction output the SignTxOutput function.
This commit contains the entire btcscript repository along with several
changes needed to move all of the files into the txscript directory in
order to prepare it for merging. This does NOT update btcd or any of the
other packages to use the new location as that will be done separately.
- All import paths in the old btcscript test files have been changed to the
new location
- All references to btcscript as the package name have been chagned to
txscript
This is ongoing work toward #214.
