Upstream commit d1e493f4ee.
Since Decred has supported the ability to disable transaction relaying
since the first version, this removes the additional checks which dealt
with only disconnecting peers that were at a high enough protocol
version to always disconnect when peers are announcing transactions when
they were instructed not to.
Upstream commit 8a58f8cf3a.
Modified the supported protocol version passed to peer to
wire.BIP0111Version which is the version in Decred just before the new
protocol version for wire.SendHeadersVersion.
Contains the following upstream commits:
- e08038115b
- This commit has already been cherry-picked so it is a NOOP
- 391d5e4a01
- This commit has been replaced by a new commit that was cherry-picked
so it has been converted to a NOOP
- c1861bc8fa
Contains the following upstream commits:
- d4852101d4
- This commit has already been independently applied so it is mostly a
NOOP
- f389742b39
In addition, gofmt -s has been run again to simplify the new additions
to Decred and and all simplifications are included in the merge commit.
Contains the following upstream commits:
- ef9c50be57
- eb882f39f8
In addition to merging the fixes in the commits, this also fixes a few
more misspellings that were introduced in the new Decred code.
Contains the following upstream commits:
- 2f6aeacfab
- This commit has already been independently applied so it is mostly a
NOOP except for a comment update
- 542844832e
- This commit has already been cherry picked so it is mostly a NOOP
- 4d40a2110a
In case of an error during protocol negotiation in handleVersionMsg,
immediately break out and prevent further processing of OnVersion
listener which generally depends upon peer attributes like NA to be set
during the negotiation. Fixes#579.
Contains the following upstream commits:
- 0c3cf63773
- ee8601ecac
- Reverted because btcd releases do not apply to dcrd
- 23df5ed2fc
- Reverted because btcd releases do not apply to dcrd
- 6c00d07910
The getaddr msg is usually replied to with an addr msg, but if
the other peer does not have any addresses to share it will not
reply at all (instead of replying with an addr msg with 0 addresses).
Therefore, the getaddr msg is not guaranteed a reply, so this commit
removes it from stall detection to avoid incorrectly kicking
such peers.
Upstream commit 3942a116e4
This merge also includes a few Decred specific modifications and
corrects some old btcjson references that should have been updated to
dcrjson.
Contains the following upstream commits:
- 00bddf7540
- 250228c32f
- f1bd2f8d6e
- cbbe3a8bbe
- aa03d68e1e
In addition to the normal required changes for syncing, the following
changes have been made in order to facilitate integration of the new
package into Decred:
- Removed check in PushRejectMsg against protocol version since all
peers since the initial version support it
- Fixed leaked timer in `syncMiningStateAfterSync` function
- Add the Decred-specific OnGetMiningState and OnMiningState handlers to
the new peer package
- Add handler for the new mining state messages to the 'serverPeer' type
and register them
- Use the new constant for wire.InitialProtocolVersion in the reject
message instead of hard coded number
- Remove logic specific to the regression network since Decred does not
have it
The --blocksonly configuration option disables accepting transactions
from remote peers. It will still accept, relay, and rebroadcast
valid transactions sent via RPC or websockets.
This modifies the peer package to add support for the sendheaders
protocol message introduced by BIP0030.
NOTE: This does not add support to btcd itself. That requires the server
and sync code to make use of the new functionality exposed by these
changes. As a result, btcd will still be using protocol version 70011.
This ensures the channel passed to QueueMessage is writable and that
QueueMessage will not read from the channel (write-only).
This change is merely a safety change. If a user of the API passes
a read-only channel to QueueMessage, it will now be caught at compile
time instead of panicking during runtime.
Also update internal functions.
This commit does not change functionality. It makes the creation of inbound and outbound peers more homogeneous. As a result the Start method of peer was removed as it was found not to be necessary. This is the first of several pull requests/commits designed to make the peer public API and internals less complex.
This implementation ensures that all addresses have an equal chance of
being included in the addr message. It also moves the pseudorandom number
generator seeding to package level so that it can be overridden for
testing if required.
The getaddr msg is usually replied to with an addr msg, but if
the other peer does not have any addresses to share it will not
reply at all (instead of replying with an addr msg with 0 addresses).
Therefore, the getaddr msg is not guaranteed a reply, so this commit
removes it from stall detection to avoid incorrectly kicking
such peers.
In case of an error during protocol negotiation in handleVersionMsg,
immediately break out and prevent further processing of OnVersion
listener which generally depends upon peer attributes like NA to be set
during the negotiation. Fixes#579.
This defines the peer stat fields directly in the Peer struct instead of
defining them in a separate struct and embedding them. It is slightly
more efficient this way and there is really no reason to have them
defined separately anyways since they are not passed around or otherwise
used independently.
Fixes a rare hang during peer tests due to the same connection being
used for different outbound peers. Also fixed passing a chan to
QueueMessage(..) which was not being waited on, so was not being used.
This commit modifies the peer logging so that it will not log an error
when it's due to the remote peer disconnecting or the peer being
forcibly disconnected or shutdown.
First, it removes the documentation section from all the README.md files
and instead puts a web-based godoc badge and link at the top with the
other badges. This is being done since the local godoc tool no longer
ships with Go by default, so the instructions no longer work without
first installing godoc. Due to this, pretty much everyone uses the
web-based godoc these days anyways. Anyone who has manually installed
godoc won't need instructions.
Second, it makes sure the ISC license badge is at the top with the other
badges and removes the textual reference in the overview section.
Finally, it's modifies the Installation section to Installation and
Updating and adds a '-u' to the 'go get' command since it works for both
and thus is simpler.
This commit implements stall detection logic at the peer level to detect
and disconnect peers that are either not following the protocol in
regards to expected response messages or have otherwise stalled. This
is accomplished by setting deadlines for each message type which expects
a response and periodically checking them while properly taking into
account processing time.
There are an increasing number of nodes on the network which claim to be
full nodes, but don't actually properly implement the entire p2p
protocol even though they implement it enough to cause properly
implemented nodes to make data requests to which they never respond.
Since btcd currently only syncs new blocks via single sync peer and,
prior to this commit only had very basic stall detection, this could
lead to a situation where the block download became stalled indefinitely
due to one of these misbehaving peers. This commit fixes that issue
since the stalled peer will now be detected and disconnected which leads
to a new sync peer being selected.
This logic will also fit nicely with the future multi-peer sync model
which is on the roadmap and for which infrastructure work is underway.
Fixes#486 and fixes#229.
This commit modifies the ping logic in the peer to ping on an interval
regardless of what other messages are being sent versus the previous
method of delaying the ping each time a message that is expected to
receive data is sent.
This helps improve the ping statistics and simplifies its logic.
This fleshes out the doc.go documentation which is shown on godoc, the
README.md shown on github, and improves a couple of comments for the
fields in the Config struct.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
